2020 MAKO 21 LTS
21 LTS
w/ 150 XL FourStroke and Trailer

NO HAGGLE NO HASSLE
National Price
$ 39,995 USA

View Prep and Freight Prices

Photos may show optional equipment.
Specs and features subject to change without notice.

Specials for this boat:
Bass Pro and Cabela's VIP Discount Card with MAKO Purchase

Standard Features
Certification & Safety
Backed by MAKO® Assurance 5+Life—the best factory warranty in saltwater boats
NMMA® certified
Factory leak tested for hull, plumbing & fitting integrity
Fire extinguisher
Horn
Console
Elevated fiberglass console
Stainless steel destroyer-style steering wheel
SeaStar™ hydraulic steering
Analog tachometer, fuel gauge & water pressure gauge
Binnacle-mounted remote motor control w/power trim switch
Battery/gear storage
Removable forward-console 72-qt. (68.14 L) cooler/seat w/integrated cushion
Heavy-duty anodized aluminum grab rail
Contoured acrylic windscreen
Area to flush- & surface-mount additional electronics
2 stainless steel drink holders w/drainage system
NEW 2 console rod holders
Interior
NEW pre-wired for optional trolling motor
Anchor locker
2-tone high-density marine-grade vinyl upholstery w/stain-resistant coating & composite substrates on seats
360° fishability
90-qt. (85.17 L) bow port & starboard boxes w/stainless steel lockable compression latches
136-qt. (128.7 L) bow center storage compartment w/locking stainless steel compression latch
Anodized aluminum helm seat frame w/4-rod rocket launcher & removable 94-qt. (88.96 L) cooler w/integrated seat cushion
2 large aft guttered & gasketed lock-down dry storage compartments
Closed-molded laminate hatch covers w/finished undersides
Lighted aft 30-gal. (113.56 L) livewell w/Pro-Air® aeration system
Closed-molded coaming boards
Bilge access hatch
Performance
Award-winning Rapid Planing System™ (RPS) transom for quicker holeshots, shallow-water abilities & better overall performance
8" (20.32 cm) hydraulic jack plate
Factory-rigged w/matched propeller
Hardware & Accessories
Seven 6" (15.24 cm) stainless steel low-profile pull-up cleats (bow, fore, midship & aft)
Powder-coated transom reinforcement plate w/MAKO® logo
Reboarding step & stainless steel grab handle
Stainless steel & bronze thru-hull fittings
Stainless steel bow & stern eyes
Stainless steel fuel fill
Construction & Exterior
Color: MAKO® Bone White gelcoat
100% composite construction
Encapsulated, fiberglass-infused transom w/high-density Coosa® Bluewater composite core
Molded, patterned non-skid casting platforms & cockpit sole
Console chemically bonded & mechanically fastened to deck w/.25" (6.35 mm) aluminum backing plates
Hull/deck joint chemically bonded & mechanically fastened w/stainless steel fasteners for strength & durability
Integrated 1-piece molded, gelcoated fiberglass stringer grid system w/gelcoat finish & fully injected w/closed-cell foam for USCG-approved flotation
High-density, fiberglass-infused trolling motor mounting core
Premium marine-grade stainless steel hardware & fasteners for corrosion resistance
Gelcoat finish on all bulkheads & compartment interiors
Self-bailing cockpit
Composite seat substrates
Heavy-duty rub rail
Electrical, Mechanical & Plumbing Systems
Integrated EPA-compliant fuel system w/rotocast corrosion-free fuel tank
1,000 GPH (3,785.41 LPH) cartridge baitwell pump w/auxiliary inlet port
High-speed raw water pickup
USCG-compliant navigation lights
2 cockpit courtesy lights
Interstate® cranking battery w/tray
6-circuit ATO/ATC distribution fuse block
Marine-grade rocker switches w/push button breaker protection
Marine-grade tinned wiring w/submersible connectors
12V outlet
Trailer
Custom tandem-axle trailer
Tandem-axle brakes
Sure Lube hubs
1,000-lb. (453.59 kg) capacity tongue jack
Aluminum construction
Stainless steel hardware
Galvanized steel components
LED marker lights
PVC loading guides
Options
Electronics
Simrad® GO5 XSE w/transducer $ 675
Simrad® GO5 XSW w/DownScan transducer $ 825
Auto bilge w/float $ 20
Dual Pro® PS3 3-bank, 45-amp battery charger $ 515
Dual Pro® PS4 4-bank, 60-amp battery charger $ 640
Guest 3-bank, 30-amp battery charger $ 275
Guest 4-bank, 40-amp battery charger $ 375
SmartCraft® digital gauges $ 675
Rigging
Remove MAKO® turn-key installation (credit given) $-250
Accessories
Flush-mounted compass $ 175
Starboard rod storage organizer $ 180
Tackle box management system $ 300
2 flush-mounted aft rod holders $ 100
Port & starboard side rails $ 340
Minn Kota® Talon 8' 4" (2.54 m) shallow-water anchor (dealer installed) $ 2,335
2 Minn Kota® Talon 8' 4" (2.54 m) shallow-water anchors (dealer installed) $ 4,675
Performance & Steering
Hydraulic jack plate w/emergency ladder $ 325
Custom stainless steel steering wheel w/knob $ 90
Trolling Motor
Minn Kota® Riptide® SM 80 24V, 80-lb. (36.29 kg) thrust, 62" (1.57 m) shaft trolling motor (trolling battery & dealer installation not included) $ 1,350
Minn Kota® Riptide® ST 80 24V, 80-lb. (36.29 kg) thrust, 54" (1.37 m) shaft trolling motor w/CoPilot (trolling battery & dealer installation not included) $ 1,575
Minn Kota® Riptide® ST 80 24V, 80-lb. (36.29 kg) thrust, 62" (1.57 m) shaft trolling motor w/i-Pilot® (trolling battery & dealer installation not included) $ 1,925
MotorGuide® Xi5 wireless 24V, 80-lb. (36.29 kg) thrust, 60" (1.52 m) shaft trolling motor w/GPS (trolling battery & dealer installation not included) $ 2,150
Functional
2-tone hull in Gulfstream Blue, Onyx Black, Pompano Silver, Seafoam Green, Trigger Gray or Wahoo Blue $ 325
Powder-coated rails $ 350
Deluxe tournament console grab rail $ 400
Bike seat (includes seat, base, pole & spyder) $ 150
Tournament seat (includes seat, base, pole & spyder) $ 300
Forward & aft bike seats (includes seats, bases, poles & spyders) $ 315
Forward & aft tournament seats (includes seats, bases, poles & spyders) $ 540
1 bike & 1 tournament seat (includes seats, bases, poles & spyders) $ 440
Helm leaning post backrest $ 350
Helm leaning post & aft center seat backrests w/center cushion $ 985
Helm leaning post & aft center seat backrests w/port, center & starboard cushion set $ 1,250
Aft port & starboard casting deck jump seats $ 125
Leaning post backrest & center cushion $ 595
Removable leaning post backrest w/aft port, center & starboard cushion set $ 795
Removable bow casting platform $ 700
Poling platform (includes push-pole holders & dual rod holders) $ 2,575
Raw water washdown $ 200
Anchor locker/casting net tub $ 75
Active trim $ 575
Trim tabs (factory installed, mandatory w/115 motors) $ 835
Tops
Bimini top w/stainless steel frame (dealer installed only) $ 1,125
Bimini top w/stainless steel frame & deluxe tournament console grab rail $ 1,350
Canvas T-top $ 3,450
Covers & Curtains
Ratchet cover—Black (fits boats w/ or w/out trolling motor, but will not fit w/T-top) $ 625
Trailer
Spare tire kit for standard trailer w/galvanized wheel & ST215/75D14 radial tire $ 325
Deluxe package w/tandem torsion axles, tandem-axle brakes, aluminum wheels, aluminum spare tire carrier & wheel/tire $ 825
Dealer installed option pricing does not include labor for installation.
See your dealer for more details.